technology

1855Currently online
141Today's Reading
44Share Today
Multilingual display

How to remove the lid of Hals kettle

2018-04-22 00:00:11

The thermal pot can not be separated in winter, but the lid can not be opened.

Methods/Steps
1

Method 1: Balance internal and external atmospheric pressure. Return the cup to its original state and soak it in 90 degree water for 8-10 minutes

2

2. Increase the friction between your hands and the lid. Twist it with a wet towel.

3

3. Or tap the lid down a few times

4

Method 2 The key to vacuum stainless steel insulated bottle caps is to be able to press the middle of the button on the outside of this plastic ring. Try to pull it out. Underneath it are four mounting claws. After pulling out the part, try to pull out one or two of the mounting claws, and then use a flat-mouth screwdriver to pry out the rest of the mounting claws, and more than half of the success. But be careful not to break the mounting claw.

5

This content has been taken from experience without authorization

6

This big ring is not fitted with claws and turnbuckle. You can get down with a little pressure. Inside is the switch control device.

7

Vacuum stainless steel insulated bottle cap removed after all accessories. Reverse program installation can be

Recommendation