technology

507Currently online
47Today's Reading
36Share Today
Multilingual display

Metal watch moisture-proof way and maintenance method

2018-03-30 03:12:57

Watchbands are generally divided into metal watchbands and belts, of which metal watchbands become the first choice for many fans because of their durability and unique metal, but if not properly maintained, metal watchbands known for easy maintenance will make your appearance greatly reduced. In many people's eyes, for the whole watch, the strap is often less attention than the movement, but in fact, the strap is the most important part of the "watch wear". Watchbands are generally divided into metal watchbands and belts, of which metal watchbands become the first choice for many fans because of their durability and unique metal, but if not properly maintained, metal watchbands known for easy maintenance will make your appearance greatly reduced. Usually wear the watch will accidentally rub water, or watch damp, at the same time, in order to watch the appearance of beauty, some will also be gold-plated, then these watches under the moisture how to maintain? How to keep a gold-plated watch clean and clean? Xiao Bian teaches you how to maintain your watch. Ordinary mechanical watches are affected by the tide, dry cotton can be pressed on the watch, and then baked with a 40-watt light bulb for 5 minutes, the moisture in the watch can all be evaporated, do not bake the table close to the fire directly, so as not to make the table suffer from heat deformation. If the quartz electronic watch is affected by the tide, it is advisable to several small pieces of calcium chloride, wrapped in gauze; Then open the cover of the electronic watch, the calcium chloride and the electronic watch together into a non-leaking plastic bag or glass bottle, sealed. Generally, the tide can be removed in about 3 hours, so that the electronic watch can return to normal. For the seriously damp table can be appropriate moisture absorption time. You can also put the watch inside, the bottom shell outside, wear it on the wrist, and the moisture can be eliminated after two hours. If the water is serious, it is best to immediately send the table to wipe the oil and remove the moisture of the movement to avoid rust of the parts. The table is damp, indicating that the waterproof function has been lost, the waterproof ring is aging or broken, and it needs to be replaced in time to avoid repeating the mistake. After the movement is in water, the mixing of oil and water will produce another substance, which reduces the lubrication, and after drying, the degree of lubrication is greatly damaged, so that the parts are in a dry grinding state. In summary, it is best to timely repair and maintenance after the water is in the table. The gold layer on the gold-plated watch is mostly 14K gold, which contains 58.5% pure gold in addition to a certain amount of silver. After the reaction of silver and some volatile industrial waste gases in the air, a black silver sulfide film will be produced on the surface, so that the gold-plated watch will lose its yellow gold. Therefore, wear gold-plated watches to avoid contact with chemicals and exhaust gases, such as gas, liquefied gas and sulfur soap, and often keep the gold-plated watch dry and clean. It is best to wipe it with a flannel once a week. In addition, the chloride in the sweat has a great corrosive effect on the gold-plated watch, and the gold-plated watch should be wiped clean in time when it is stained with sweat, so as not to make the watch lose its original sweat. The yellow plating layer of the yellow watch is a metal film composed of copper, zinc and aluminum alloy, which is easy to fade and lose if it is not well maintained. Before wearing a yellow-plated watch, the case should be wiped clean with a clean soft cloth, and evenly coated with a layer of colorless nail polish, dry and then wear, after every 1 to 2 months coated 1 times. After such treatment, not only can maintain the color of the yellow plated watch, not be worn, but also can increase its appearance brightness, while in the hot summer can also prevent sweat and moisture intrusion into the watch. Before wearing a gold-plated watch, the case should be wiped clean, and evenly coated with a layer of colorless nail polish, dry can maintain the color of the yellow watch, not to be worn, but also to increase its appearance brightness, while in the hot summer can also prevent sweat and moisture intrusion into the table. It must be noted that the chloride in the sweat is very corrosive to the gold-plated watch, and the gold-plated watch should be wiped dry in time when it is stained with sweat. That is, we must maintain the cleanliness and dryness of the watch, and it is best to wipe it often with a velvet cloth.

Recommendation