technology

1393Currently online
47Today's Reading
36Share Today
Multilingual display

pp glue Jinghong adhesive strength is high

2018-04-09 22:24:40

PP (polypropylene) 1202 glue PP glue PU leather glue /PP glue EVA glue /PP glue ABS,PP glue cloth glue /PP glue PC glue. PP sticky PS glue, PP sticky silicone rubber glue... PP

Tools/Materials
1

Material to be bonded

2

PP treating agent and glue

Methods/Steps
1

The information illegally crawled from experience

2

Unscrew H-1205PP treatment agent (bottle cap comes with a brush), evenly brush the PP surface to be glued, wait for about 10 seconds, the treatment agent volatilizes (treated materials, need to be bonded within 60 minutes

3

Then add an appropriate amount of H-1202PP special glue (small area bonding, can be put on a needle or drop to control the amount of glue), and fit. 3, after the adhesion of the product, the glue curing time varies from a few seconds to a few minutes. Practical strength can be reached in about 30 minutes, and ultra-high strength can be obtained after 24 hours.

Matters needing attention
1

The treated material should be bonded within 60 minutes

2

If not used for a long time, it can be refrigerated

Recommendation