psp game download tutorial

If you want to run UMD games. You need to purchase a legitimate UMD disc to obtain the corresponding game. Necessary accessories: any PSP, the corresponding UMD game disc (note: some games need to be upgraded to the corresponding high version of the PSP system) This is the easiest way to play PSP games, players to the major game surface to buy SONY for the PSP UMD game disc can be. Each game is a disc. The price of each game is different, basically around 5000 yen (more than 300 yuan), and the BEST version (that is, the cheap version) in the later period is priced around 2800 yen (more than 200 yuan). Into the game, box on the back cover:

If you want to play the PSP hack game, first make sure that your machine is using the hack system (generally when you buy, the merchant will help you brush the machine to ensure that you can play the hack game). Please refer to our upcoming PSP zone and forum posts on how to hack the system.

The basic steps to play the crack game are: 1. Download the game ISO2. Decompress the game ISO3. Copy the ISO to the folder ISO in the root directory of the memory stick 4. Upgrade to the latest homemade system 5 if necessary. Set boot-free 6. Run the game

Game ISO is not working? Let's see, it may be the following reasons: Class 1, not properly decompressed: The first case: the decompression is "too thorough ". General game download down, extract the ***.iso format (or CSO format, etc.) file from the compressed package, is the target game file we want, this do not use WINRAR and other tools to further unlock the compression. If the system does not install ISO and other software, it is possible that *.iso file will also be WINRAR default to RAR file icon, do not remember to compress.

Second case: Compression has not been unzipped. Generally, this situation is the use of BT and other tools to download down the file, or use thunder and so on, but the file is very fragmented, a lot of, like a lot of numbers such as "000 001 002" and some friends think that this is to put all files into the ISO folder, in fact, this is not the right way is to open a compression package at will, Unzip it and the entire ISO will be decompressed automatically. Of course, the premise is that you make sure that the downloaded stuff is complete, without changing the location and file name. The obtained ISO can be used to play. (Experience: sometimes some files under BT, the suffix is not familiar to us.rar,.zip, etc., but we can still try to use WINRAR and other tools to decompress.)

Class 2, not placing the ISO in the correct location: The ISO or CSO files in the correct directory should be placed in the ISO folder under the root directory of the PSP memory stick. If not, you can do it yourself. Once placed, enter the memory stick from the game menu. Just choose the game you want to play.

Another model is called the dumb-bag. This type of file usually has "PSP", "X" and other folders when unwrapped. The placement method for this game is simple: overwrite all files directly into the root directory (this method is only used for dumb package games). Other games are not available). Uninstalling is relatively cumbersome: you need to find the files that were installed and delete them one by one. If you don't like the trouble, back up important data and format the memory stick. However, such "fool packs" are now very rare, and some early games may still have this format.

The third category, clarify the boot problem: for the old system such as the previous OE, many cracking games require UMD boot to run. The first premise is that there should be any available UMD (other than movies and some games) that can be used as a boot disk. Many games now require guidance. In the communication with some friends found that their problem is that there is no boot disk. There's no way to fix this. Early DEVHOOK users should note that DH systems require UMD to boot more than OE systems. Some games can not run, we can try to turn off the UMD-free function, because some games run in the OE system requires UMD to guide. How to set it up? First shut down → press the R key to start the system and enter the RECOVERY mode → Select CONFIGURATION→USE-NO UMD, set this parameter to "DISABLED", and then work with UMD.

If it is the new version of the M33 and other homemade systems, these homemade systems have a very strong boot-free ability, basically no longer rely on the UDM disk, but in the homemade system still retains this option. Before playing the game, let's set up the bootstrap mode of the homebrew system. In the following figure, press the SELECT key to display the following menu. Select the fourth item UMD ISOMODE and press the left and right arrow keys to set the boot mode.

There are four modes: M33 driver, Sony, OE isofs, and Noraml, among which M33 driver and Sony NP9660 are relatively complete boot modes, generally we only need to take these two modes. We recommend the M33 driver mode for the best read speed and efficiency. The OE isofs pattern is an early bootstrap pattern that is far from perfect and is not recommended. Normal is a disk boot, requiring a UMD disk to be placed in the disc bay to run the game. After setting the boot mode, we press the SELECT key again to close the menu. As shown below, select "Memory Stick" from the "Games" menu to enter. Then choose the game you like.

The fourth category,ISO itself problems: some games ISO itself is problematic, the operation can not or frequently error this only wait for the emergence of a more legitimate version. Or see what solutions are announced. We also welcome you to come to the forum at any time to ask questions and help you.

Class 5, crack the system version is low: some new games will require a new version of the system to run, if your PSP system version is too low, it is likely to run the game is black screen or can not run, this time only updated to the new homemade system can play.