technology

584Currently online
81Today's Reading
43Share Today
Multilingual display

Teach everyone how to change the pedal motorcycle burner

2018-02-21 22:24:00

When a motorcycle stops running, it is a very annoying thing. It brings great inconvenience to the owner, the motorcycle stalls or can not start. Most of the time it's caused by the burner. Now I'm going to show you how to change the burner. Take WH125(Princess 125) for example.

Tools/Materials
1

T-sleeve size 10 or 8 (depending on screw)

2

Cross knife or blade knife (depending on screw)

3

Ten centimetre nozzle sleeve

4

All right, ten point burner

Methods/Steps
1

Take the toilet apart and use the appropriate tools to unscrew each of the five screws on the toilet

2

Remove the cover. Use a Phillips knife to remove the two screws on the cover

3

Pull the burner out of the burner

4

Put the burner sleeve in the burner mouth Put the ten centimetre burner sleeve in the burner mouth

5

Loosen the nozzle, insert the cross knife into the hole of the nozzle sleeve, and turn it counterclockwise

6

Twist out the fire nozzle when the fire nozzle is loose, twist out with your hand, which is faster

7

Install the new burner After the old burner is removed, the new burner can be installed. After installing the fire nozzle, install the removed items in the opposite way. All right, that's it. Leave me a message if you don't understand anything.

Matters needing attention

When installing the new burner, be sure to twist it into the good teeth. Otherwise the cylinder head will slip.

Recommendation